HDPE Geomembrane

HDPE Geomembrane

HDPE BASED MEMBRANE

HDPE Membrane, is a geomembrane material made of high-density polyethylene, which provides impermeability in projects such as regular solid waste storage areas, mine waste storage areas, acid pools, tank areas, ponds and irrigation channels. It is produced as resistant to chemical, biological, mechanical effects and UV thanks to its special resin with antioxidant and carbon black mixture used in its production.

Application and Usage Areas

HDPE Membrane can be used quickly and safely in large-area projects that require resistance to chemical, biological, mechanical effects and UV, thanks to its large roll sizes. It is used in the following areas.

  • Regular solid waste landfills
  • Mining waste landfills
  • Acid pools
  • Tank yards
  • Waste water treatment plants
  • Irrigation channels
  • Pond projects

Advantages

  • It is long-lasting thanks to its special resin containing antioxidant and carbon black.
  • It has high strength and elongation values.
  • Resistant to chemical effects.
  • It has high UV resistance thanks to its carbon black.
  • Thanks to its special welding method, it provides the opportunity to perform air pressure stripping and peeling tests from the joints.
  • The size of the roll sizes makes the application fast and practical in large-area projects.
  • It can also be applied in high slope areas with products with roughness on one or both sides.
  • Low density (LLDPE, VLDPE) materials can also be produced for use options in different applications.

Packaging and Storage

The materials are shipped in rolls with a width of 7 – 9.5 m and a length of 100 – 200 m.

Materials should be stored on a flat surface. Stored products should be kept away from direct sunlight, heat and ignition sources. If the rolls need to be stored in the open for a long time, they should be covered to protect them from sunlight. Smoking should not be allowed in the storage area.

Technical Specifications

Thickness ASTM D 5199 mm 0.75 – 3.00
Density ASTM D 1505 g/cm³ ≥ 0.94
Current strength ASTM D 6693 type IV kN/m 12-45
Flow elongation ASTM D 6693 type IV % ≥ 12
Tear strength ASTM D 6693 type IV kN/m 24-80
Elongation at break ASTM D 6693 type IV % ≥ 750
Tear strength ASTM D 1004 N 95-380
Puncture strength ASTM D 1603 N 280-1000
Oxidation induction time (OIT) ASTM D 3895 min ≥100
Devamını Oku

PVC Geomembrane

PVC Geomembrane

PVC BASED MEMBRANE

PVC Membrane, It is a geomembrane material made of polyvinyl chloride, providing water impermeability in foundation, roof, pond and tunnel projects. It is produced as chemical resistant, UV resistant or with signal layer, which has been specially developed for applications in different projects.

Application and Usage Areas

With the welding machine, the joints can be joined with minimum labor. Thanks to single or double row welding machines produced with the latest technology, it is possible to make a safe and controllable insulation.

  • Building foundation and curtain wall insulation
  • Terrace and garden terrace roofs
  • Drinking water tanks
  • Water reservoirs
  • Light metal roofs
  • Irrigation channels
  • Ponds
  • Metro stations
  • Railway, subway and highway tunnel projects

Advantages

  • Long lasting.
  • It has high resistance to chemical and mechanical effects.
  • The plant has root resistance.
  • With its UV resistant and carrier types, it is highly resistant to external conditions.
  • Products with a signal layer can be visually controlled.
  • It is applied safely, easily and quickly with special welding machines.
  • The tightness of the joint can be checked with double row joint welding.

Packaging and Storage

The materials are shipped in rolls with a width of 1.6 – 2.1 m and a length of 20 – 25 m.

Materials should be stored on flat ground and indoors. Stored products should be kept away from direct sunlight, heat and ignition sources. If PVC cover rolls need to be stored outdoors for a long time, they should be covered to protect them from sunlight. Smoking should not be allowed in the storage area.

Technical Specifications

Thickness (mm) 1.2 – 1.5 – 2.0 – 2.5 – 3.0
Roll en (m) 1.60 – 2.10
Roll length (m) 20 – 25
Elongation at break (%) ≥ 250
Cold bending ≤ -20 °C
Hydrostatic compressive strength Waterproof
Plant root resistance No penetration
Devamını Oku

EPDM Geomembrane

EPDM Geomembrane

EPDM BASED MEMBRANE

EPDM Membrane is a geomembrane material made of polyvinyl chloride that provides water impermeability in foundation, roof, pond and tunnel projects. It is produced as chemical resistant, UV resistant or with signal layer, which has been specially developed for applications in different projects.

Application and Usage Areas

With the welding machine, the joints can be joined with minimum labor. Thanks to single or double row welding machines produced with the latest technology, it is possible to make a safe and controllable insulation.

  • Building foundation and curtain wall insulation
  • Terrace and garden terrace roofs
  • Drinking water tanks
  • Water reservoirs
  • Light metal roofs
  • Irrigation channels
  • Ponds
  • Metro stations
  • Railway, subway and highway tunnel projects

Advantages

  • Long lasting.
  • It has high resistance to chemical and mechanical effects.
  • The plant has root resistance.
  • With its UV resistant and carrier types, it is highly resistant to external conditions.
  • Products with a signal layer can be visually controlled.
  • It is applied safely, easily and quickly with special welding machines.
  • The tightness of the joint can be checked with double row joint welding.

Packaging and Storage

The materials are shipped in rolls with a width of 1.6 – 2.1 m and a length of 20 – 25 m.

Materials should be stored on flat ground and indoors. Stored products should be kept away from direct sunlight, heat and ignition sources. If PVC cover rolls need to be stored outdoors for a long time, they should be covered to protect them from sunlight. Smoking should not be allowed in the storage area.

Technical Specifications

Thickness (mm) 1.2 – 1.5 – 2.0 – 2.5 – 3.0
Roll en (m) 1.60 – 2.10
Roll length (m) 20 – 25
Elongation at break (%) ≥ 250
Cold bending ≤ -20 °C
Hydrostatic compressive strength Waterproof
Plant root resistance No penetration
Devamını Oku
WeCreativez WhatsApp Support
Our customer representative is here to answer your questions.
How can I help you?