Green Roof Drainage Board, HDPE made of high-density polyethylene, is a material with compressive strength and high strength that is resistant to plant roots and rot, prevents plants from being dehydrated on rainy days, and serves to store water.
Green Roof Drainage Board Application and Usage Areas
After laying the nonwoven geotextile on the root holder foil, the green drainage sheet is laid side by side without overlapping on these two layers.
After this process is done, PP 110 gram Filter Geotextile is laid on the green roof drainage plate. The main purpose here is to allow plant roots to pass through thin layers and reach the main water reservoir. Excess rain water flows from the joints of the drainage plate plates, is directed to the parapet thanks to the slope in the structure and is discharged from there.
- Terrace roofs of buildings
- parking tops
- It plays a very important role in building insulation.
- It provides a significant reduction in heating and cooling system costs and carbon dioxide emissions of green building applications.
- Thanks to the plant layer, the roof facade system of the building is also protected against external factors.
- It contributes to urban water management with the versatile use of the vegetation layer.
- Green roof and facade systems, which can retain a significant amount of rain water, also contribute to the purification of water.
- Excess rain water flows from the joints of the Green Roof Drainage Board plates and is directed to the parapet thanks to the slope in the structure and is discharged from there.
- Due to its water holding capacity in its reservoir, it allows plants to grow without the need for extra irrigation.
- Investment in green building systems also provides savings in sewerage system and water treatment system operation and investments.
- Green roof applications are also known to improve air quality.
It reduces the effect of sun rays affecting the structure.
It is produced as Plate and Roll depending on the product.
Plates are stored horizontally and rolls are stored vertically.
It is produced in 1 x 2 m – 2.5 x 1.2 m slabs, 2 x 20 m – 2.5 x 20 m rolls.
